Abstract
AimThe aim of this study was to experimentally determine the energy loss in different techniques of femorofemoral anastomosis.MethodsFemorofemoral anastomoses were performed in five different configurations including the S 45°, S 90°, inverted - U, U, and right-angled. Femorofemoral anastomosis configurations were created by using tubing sets and polytetrafluoroethylene (PTFE) synthetic ringed grafts of the same length. The flow was provided by a cardiopulmonary bypass pump. The pressure measurements were taken with constant, real-time pressure monitoring of the lines before and after the femorofemoral anastomosis sites.ResultsThis experimental study revealed the advantage of type S anastomosis. In the S anastomosis type, minimum energy loss and the lowest gradient recordings were determined. The minimum energy loss and gradient difference were observed in the S 45°.ConclusionsType S femorofemoral anastomosis is a hemodynamically more effective choice than the other techniques.
Keywords
Additional Information
Publisher’s Note
Bayrakol MP remains neutral with regard to jurisdictional and institutional claims.
Rights and Permissions
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0). To view a copy of the license, visit https://creativecommons.org/licenses/by-nc/4.0/
About This Article
How to Cite This Article
Muhammet Akyuz, Mert Kestelli, Habib Cakir, Nihan Karakas, Onur Isık, Ali Gurbuz. Types of anastomosis in femorofemoral bypass surgery. J Clin Anal Med 2017;8(Suppl 2):102-104. doi:10.4328/JCAM.4950
Publication History
- Received:
- 15.02.2017
- Accepted:
- 08.03.2017
- Published Online:
- 01.04.2017
- Printed:
- 01.04.2017